1998 Toyota Camry Rear Brake Pad Replacement Diagram

19 Dec, 2021 Post a Comment

Kats Heaters Vehicle Heaters - KH11813

Engine Block Heater
Cartridge Style
400 Watts
Kats Heaters

This cartridge heater clips into the cavity of your engine block and transfers heat through the block to help warm engine fluids resulting in easier start-ups, faster heating of your cab, and less wear and tear on your vehicle in cold weather.

Features:

Ensures smoother start-ups and faster heating and defrosting of your cab
- Clips into cavity of engine block - no need to remove your frost plug or drain your coolant
- Dielectric grease can be applied to heater before being installed in the engine block
Warms engine fluid to increase lubrication and performance
- Keeps fluid from thickening and protects against damage in cold weather
Pre-heats engine to reduce condensation in the engine block
- Emits less pollution and fewer gas emissions
Includes removable power cord
- Route through your grille and plug into standard 120-volt AC outlet
Durable cast-aluminum heating element
Custom fit for your vehicle
CSA approved
Made in the USA

Specs:

Cord length: 5'
Wattage: 400 watts
Amperage: 3.3 amps
1-Year limited warranty

Notes:

Do not use this heater with a 100-percent antifreeze solution.
Do not start your engine with the heater plugged in.

Benefits of a Heated Engine

Start your engine easier and warm your cab faster in cold weather with this cartridge-style engine block heater. Heating your engine coolant keeps it from thickening and freezing, resulting in more reliable start-ups and smoother operation altogether. It also lessens the workload and extends the life of your vehicle's battery. And because starting your engine when it's warm creates less condensation in the engine block than starting it when it's cold, your engine will get better initial fuel vaporization, which causes fewer emissions and less pollution.

Cartridge-Style Heater

This cartridge-style heater simply clips into the cavity of your engine block. There is no need to remove the core frost plug. The power cord on the heater is removable so that you won't need to buy a whole new heater if the cord gets damaged. The cord can be routed through your grille for easy access to a 120-volt outlet or extension cord.

11813 Kat's Heaters Custom-Fit Engine Block Heater - Cartridge - Removable Power Cord - 120 Volts - 400 Watts

This Product Fits The Following Vehicles

2000 - 2005 Toyota Echo 1.5L I4 Engine
2016 - 2016 Scion iA 1.5L I4 Engine
2001 - 2009 Toyota Prius 1.5L I4 Engine
2012 - 2019 Toyota Prius c 1.5L I4 Engine
2004 - 2007 Scion xB 1.5L I4 Engine
2006 - 2018 Toyota Yaris 1.5L I4 Engine
2019 - 2020 Toyota Yaris Hatchback 1.5L I4 Engine
2017 - 2018 Toyota Yaris iA 1.5L I4 Engine
1998 - 2005 Toyota Celica 1.8L I4 Engine
2003 - 2018 Toyota Corolla 1.8L I4 Engine
2019 - 2022 Toyota Corolla Hatchback 1.8L I4 Engine
2017 - 2018 Toyota Corolla iM 1.8L I4 Engine
2016 - 2016 Scion iM 1.8L I4 Engine
2003 - 2014 Toyota Matrix 1.8L I4 Engine
2000 - 2005 Toyota MR2 Spyder 1.8L I4 Engine
2010 - 2022 Toyota Prius 1.8L I4 Engine
2012 - 2015 Toyota Prius Plug-In Hybrid 1.8L I4 Engine
2017 - 2022 Toyota Prius Prime 1.8L I4 Engine
2012 - 2017 Toyota Prius v 1.8L I4 Engine
2008 - 2014 Scion xD 1.8L I4 Engine
2004 - 2010 Toyota Camry 2.4L I4 Engine
2009 - 2010 Toyota Corolla 2.4L I4 Engine
2001 - 2007 Toyota Highlander 2.4L I4 Engine
2004 - 2008 Toyota RAV4 2.4L I4 Engine
2004 - 2008 Toyota Solara 2.4L I4 Engine
2005 - 2010 Scion tC 2.4L I4 Engine
2008 - 2015 Scion xB 2.4L I4 Engine
2011 - 2011 Toyota Camry 2.4L I4 Engine - Hybrid
2009 - 2022 Toyota Camry 2.5L I4 Engine
2013 - 2022 Lexus ES 300h 2.5L I4 Engine

2015 - 2022 Lexus NX 300h 2.5L I4 Engine
2009 - 2018 Toyota RAV4 2.5L I4 Engine
2011 - 2016 Scion tC 2.5L I4 Engine
2013 - 2022 Toyota Avalon 2.5L I4 Engine - Hybrid
2009 - 2019 Toyota Highlander 2.7L I4 Engine
2011 - 2012 Toyota Sienna 2.7L I4 Engine
2009 - 2016 Toyota Venza 2.7L I4 Engine
2005 - 2022 Toyota Avalon 3.5L V6 Engine
2007 - 2022 Toyota Camry 3.5L V6 Engine
2007 - 2020 Lexus ES 350 3.5L V6 Engine
2010 - 2020 Lexus GS 350 3.5L V6 Engine
2008 - 2022 Toyota Highlander 3.5L V6 Engine
2016 - 2022 Lexus IS 300 3.5L V6 Engine
2010 - 2022 Lexus IS 350 3.5L V6 Engine
2016 - 2022 Lexus RC 300 3.5L V6 Engine
2015 - 2022 Lexus RC 350 3.5L V6 Engine
2007 - 2022 Lexus RX 350 3.5L V6 Engine
2007 - 2020 Toyota Sienna 3.5L V6 Engine
2016 - 2022 Toyota Tacoma 3.5L V6 Engine
2003 - 2022 Toyota 4Runner 4.0L V6 Engine
2007 - 2014 Toyota FJ Cruiser 4.0L V6 Engine
2005 - 2015 Toyota Tacoma 4.0L V6 Engine
2005 - 2014 Toyota Tundra 4.0L V6 Engine
2011 - 2011 Lexus GS 460 4.6L V8 Engine
2011 - 2022 Lexus GX 460 4.6L V8 Engine
2011 - 2017 Lexus LS 460 4.6L V8 Engine
2008 - 2010 Toyota Sequoia 4.6L V8 Engine
2010 - 2019 Toyota Tundra 4.6L V8 Engine
2008 - 2021 Toyota Land Cruiser 5.7L V8 Engine
2008 - 2022 Lexus LX 570 5.7L V8 Engine
2008 - 2022 Toyota Sequoia 5.7L V8 Engine
2007 - 2022 Toyota Tundra 5.7L V8 Engine
2019 - 2022 Toyota Corolla Sedan - 1.8L I4 Engine

Customer Reviews

Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts - KH11813

Average Customer Rating: 4.3 out of 5 stars (100 Customer Reviews)

Order: This cartridge heater clips into the cavity of your engine block and transfers heat through the block to help warm engine fluids resulting in easier start-ups, faster heating of your cab, and less wear and tear on your vehicle in cold weather.

- KH11813

Does your company do any type of quality control before you send these out? I was wondering what everyone was talking about in the reviews when they said they had to file these down to get it to fit. Indeed I did have to significantly grind/file the circumference of the plug to get it to fit. Now I'm not confident that it'll stay in the block because I had to modify it so much; something that should have been made right from the factory, who does this for a living. (3rd Gen Tacoma)

Comments

I will have our customer service team reach out to you. I did some research and if you have a 2021 Tacoma with a 2.7L I4 Engine then part # KH11481
Kat's Heaters Custom Engine Block Heater - Frost Plug Style - 120V - 400 Watts - 35 mm
$47.75 is what is needed.

-- Jenny N - 11/05/2021

- KH11813

Installed this on my 2019 Toyota Tacoma. Haven't really tested it out yet as I installed it before it got seriously cold. Installation was easy. Just follow etrailers super helpful video. I did have to file a slight flat on the heater to clear the bell housing overhang. Not a manufacturer issue on the heaters part. Just normal variance on Toyota's end.

- KH11813

by: Ron R 11/13/2019 One Year Later

Mercedes-Benz

I bought the car in Winnipeg MB with NO block heater when I got it home!! Luckily Etrailer had the heater I needed. Installation was a breeze and it works like a champ.

Comments

Unfortunately the car got wrote off last winter so I cant comment on that one but I have had a Kats heater in my other Camry that I installed 8 years ago and it is still working just fine for our Manitoba winters.

One Year Later Ron R - 11/14/2020

- KH11813

by: Kyle 08/11/2021 One Year Later

Honda Element

The install was pretty straight forward except you have to grind one side of the element at the base flat in order for it to plug in, this is not in the directions. At the base where it bulges out, it gets in the way. Also the cord could be another 2 feet longer, when you route it away from hot exhaust and moving parts it uses a lot of cord. It helps tremendously in -35C, aside from those two points im happy.

- KH11813

by: Max 12/16/2021 One Year Later

Great quality and price of the product! I have used it for a year now and everything works well.

- KH11813

Installation was surprisingly not dramatic…and everything is working as promised. Thanks once again for also the constant checking with me to make sure I received the product; very appreciated.

- KH11813

by: PAT 10/30/2020 One Year Later

I installed this unit on my 2017 Tacoma when it had less than 10k on the odometer. Even with the engine bay clean and in like new condition, the heater was really difficult to install. The fit was really tight. I could not get it in the whole way and I did not want to tap on it with anything in fear of damaging the unit. With that said, it's in there and pretty much stuck. I have plugged it in during the cold months. When I fire up the truck in the morning getting ready to leave for work, I really can't tell if the Oil or Coolant are any warmer than if I didn't have the heater plugged in. Warm up times are about the same and the truck heater starts to warm up at the same time. I also don't know if it's ok to have the thing plugged in all night or if it should be on a timer. The instructions did not say. So all in all, For me I think it was a waste of money. The only thing it has done is spark up conversation when people see an extension cord plugged into the front of my truck. They say "I didn't know the new Tacoma came in a diesel?" Oh, one more thing. They sure could have made the electrical cord a few feet longer. I like doing a nice job of routing wires in my engine bay. The cord provided is so short you basically need to make a straight shot from your firewall to your grille.

- KH11813

by: Jason 01/07/2021

2006 Toyota Avalon

already installed, took about 20 minutes, only issue is the clip is a little flimsy, had to bend it a bit to get a decent bite. thanks

- KH11813

by: Chris 01/14/2018

2014 Toyota Tacoma

Attempted to install into a 2014 Tacoma. After removing the bracket the blocks the hole for the heater, the cartridge would not go in all the way. I discovered that the thickness of the cartridge where the plug connects to makes contact with the engine below the hole. I had to sand a flat part onto the heater in order for it to slide in flush. The clip barely holds the heater in to the point where I couldn't trust it. I attempted to make the bend further down the clip so it could securely hold the heater in but the clip was fragile and snapped. Attempts to contact Kats/Five Star Manufacturing was a waste of time, they never respond. I resorted to making my own clip with stronger metal and a bend at the proper length and it can be trusted to hold now. Do not purchase Kats/Five Star Manufacturing products with the expectation that they have your back if the product is faulty in some way. Purchase OEM block heaters, yeah they may cost a little more ($18 in this case) but you can expect the product to perform as expected.

- KH11813

by: James H 11/12/2019 One Year Later

Works as designed, a bit of effort required to install unless you have a garage like car lift.

Comments

Working well, look forward to another warm car block this winter.

One Year Later James H - 11/13/2020

- KH11813

by: Jean-Guy M. 09/21/2017 One Year Later

2015 Toyota Camry

This heater i installed myself on a 2015 Camry. Excellent product, as good as oem. There is no heatsink compound nor protective cap for the ac plug however. etrailer rep will be happy to find you one if needed. As for the grease, go for electronic shop or computer shop and buy heatsink compound for cpu. Forget the dielectric grease for automotive, wrong purpose.

- KH11813

by: Scott P 10/06/2017 One Year Later

Toyota 4Runner

Although these are marketed as fitting a '08 FJ, a '14 & '15 4Runner & Tundra; They do not. They will not fit in the specified location, they came apart and now they are stuck in the engine block and are useless pieces of junk. DO NOT BUY THIS!! Even my mechanic says these are not worth it. I contacted ETrailer.com and they wouldn't accept a return.

- KH11813

by: Tim C. 12/14/2016

2016 Toyota Corolla

The KH11813 block heater has worked great in my 2016 Toyota Corolla! I installed it, along with other winterizing necessities, and found that it was extremely easy and straight forward. The cavity that it fits in is on the driver's side of the motor just above the transmission. My wife was able to put it in place from the top after I removed the air cleaner box. Her small hands made it very easy to place, while I was able to clearly see the notch where the clip hooks from under the car without removing any parts. I've had it in service for about 2 months now and it has kept my block nice and warm in temps down to -30. I would highly recommend this heater to anyone that needs one.

- KH11813

by: Dale 12/08/2016

2015 Toyota Tacoma

Wouldn't work on my 2015 Tacoma pickup. Toyota attached a bracket next to the hole so that it partially overlapped the hole preventing insertion of the heater despite the website indicating the correct part number. Then I am being charged return shipping cost. Not happy.

Comments

Dale, thank you for your review and your business. According to our installation video for the 2016 Toyota Tacoma, which may be found at the following link, temporary removal of the rear skid plate will allow you to snap the heater in place. I hope this helps.

-- Laura E - 12/15/2016

- KH11813

by: William 02/12/2019

2007 Toyota Corolla

Got it hooked up and after a fix it works. There is nothing that orients the plug to the body. I unhooked it to get it in, plugged it in and hit an issue: it tripped the GFI. It seems one terminal is on a thermostat that opens the connection to the pin and switches to ground. This pin MUST end up as the 120V line and NOT the neutral line. My first hookup had it as the neutral. That trips a GFI when it cycles off and would burn up the heater on a non-GFI outlet as it would not shutoff like a GFI. I unplugged and flipped it around. That got the T-stat line on the 120V, and it will heat the coolant about 35 degrees over ambient. Not sure how to find this without trial and error, but it should probably be keyed to prevent this issue.

- KH11813

by: Kurtis 01/25/2019

2006 Scion xB

Etrailers website description, in addition to speaking with an etrailer representative, provided incorrect installation instructions which state to install cartridge heater dry. Kat's website clearly states to "coat with NSCG silicone grease G-624"! Premature failure of the cartridge heater will occur without the proper heat transfer compound. Please change your descriptions and inform your representatives. Best Regards.

- KH11813

by: Tim 01/15/2018

2014 Honda CR-V

I have installed several of these Kats heaters over the years and they are quite good. On this purchase, the unit shorted out and burned up the second use for some reason. Installation and removal is as simple as it can be on my 2016 Tacoma-etrailer was fantastic and sent me another unit; which works as expected. The best thing about purchasing from etrailer is their installation videos. It makes installing things you might not choose to, very simple and easy.

- KH11813

by: Patrick L. 12/21/2016 One Year Later

Product still works great! We just had a blast of old man winter with temps in the single digits. This unit does an awesome job as far as helping to keep the engine block warmer, and makes for quicker heat output.

Comments

Still doing a great job! etrailer is my go to for products that are made to last. Their Customer Service is second to none....and they set the bar for every other company I deal with, and buy from. Merry Christmas etrailer!

One Year Later Patrick L - 12/21/2017

Comments

Thank you for all you folks do at etrailer....love the top notch Customer Service from you folks always!

One Year Later Patrick L - 12/21/2017

- KH11813

by: Mike Hunt 12/31/2019 One Year Later

This block heater is garbage. As soon as i pulled it from the box it broke. I managed to put it back together but once again it came apart. This happened multiple time over the course of my attempted install. It also did not fit which i verified on the website that it did fit my vehicle. It caused major frustration and eventually made its way into the trash. A complete waste of time and more importantly money. Stay away from this product.

- KH11813

by: Shawn 11/10/2018 One Year Later

Toyota Venza

Purchased this for my Toyota Venza with the 3.5 2GR-FE engine. Installation was super easy, and this block heater seems to be working just fine. I generally have it set on a timer to warm the engine anywhere from 2 to 4 hours (depending on outside temperatures), and so far, it has worked as it should. For the tiny amount of money this costs for electricity while in use, I'm sure the fuel savings with faster warm up time will make up for that.....

- KH11813

by: Bryan 07/31/2021 One Year Later

Works as described. Install was simple, less than 10 mins.

- KH11813

by: Stephen 08/16/2021

2010 Toyota 4Runner

Product as described and works fine

- KH11813

by: Bill C 12/29/2020 One Year Later

Toyota Tundra

I bought this a year ago and installed it myself. It was a fairly simple and quick install. The heater works great and I recommend it for the Tundra.

- KH11813

by: Robert George 07/23/2019 One Year Later

I am not mechanic; just mechanically inclined. The part just needs to be inserted in a precast hole on the side on engine block. I added some insulation protection to the line cord with tie wraps. The work space is very crowded...I had to work by feel as much as by sight. And everything works for the winter time.

- KH11813

by: Norman 01/10/2018 One Year Later

The device looks OK but it's in a very difficult place to fit (back lower engine) Still waiting for someone with a lift so i can try to install. I struggled to find the location. Still not sure until I try.

114

Show More Reviews

Ask the Experts about this Kats Heaters Vehicle Heaters

Is There An Engine Block Heater For The 2021 Toyota Tacoma?
I confirmed with the manufacturer that Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts Item # KH11813 will indeed fit your 2021 Toyota Tacoma V6. This installs very simply as you can see in the attached demonstration video.
view full answer...
Will Kat's Heaters Engine Block Heater # KH11813 Fit 2019 Toyota 4Runner
Yes, the Kat's Heaters Custom Fit Engine Block Heater # KH11813 is a confirmed fit for your 2019 Toyota 4Runner with the 4.0L V6 engine. I verified this with Kat's. I have included a sample install video on an earlier model 4Runner below that you can use for reference.
view full answer...
Is Any Grease Needed When Installing Kat's Block Heater in Vehicle
Kat's does recommend coating the cartridge with NSCG silicone grease G-624 before inserting the cartridge heaters like the # KH11813 into the block.
view full answer...
Recommended Block, Oil Pan, and Battery Heaters for 2019 Toyota Tacoma for Alaskan Winter
The Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts # KH11813 is a confirmed fit for the 3.5L V6. You should not need to alter the element or clip in any way and doing so is not recommended. You may want to consider also getting the Kat's Heaters Plug Cover for Power Cords with 3-Prong Plugs # KH28405. This heater is designed to heat your engine block, but with that -40 degree temperature, you should also consider using an oil pan heater like the Kat's...
view full answer...
Where Does the Kat's Block Heater Install on a 2016 Toyota Corolla
The Kat's cartridge block heater # KH11813 installs in the block hole on your 2016 Toyota Corolla. It is located on the rear driver's side (left) of the motor. To give you an idea of what you are looking for I included a link to a video showing the same heater being installed on another vehicle it fits.
view full answer...
Will Kat's Heaters Custom Fit Engine Block Heater KH11813 Fit 2016 Toyota Camry Hybrid
Yes, the Kat's Heaters Custom Fit Engine Block Heater # KH11813 that you referenced is confirmed to fit your 2016 Toyota Camry Hybrid model with the 2.5L engine. It will install on on the rear left side of the engine block (at the back corner of the block towards the driver's seat when looking under the hood). I have attached an image to assist.
view full answer...
Installation of Block Heater on 2014 Toyota Camry SE V6
The Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts # KH11813 is the correct fit and will install in the front left (FL) position of your 2014 Toyota Camry 3.5L V6. I've attached a video of the installation on a 4Runner to help as it has the plug install in the same location. The I4 engine would install in the rear left location, but the V6 is in the front left.
view full answer...
Installing Engine Block Heater on 2017 Toyota Corolla
When installing the Kat's Heaters Custom Fit Engine Block Heater # KH11813 on your 2017 Toyota Corolla, you will need to first clean the cartridge hole (after locating it on the engine block) of all debris. Kat's does recommend coating the cartridge with NSCG silicone grease G-624 before inserting it into the block. The grease is not included. I did confirm with my contact at Kat's that this will fit the 2017 Toyota Corolla. According to Kat's, this will install in the Rear Left (RL)...
view full answer...
Where Does Kat's Heater Install in 2016 Toyota RAV4
According to Kat's the part # KH11813 will install in the RL or rear left cartridge. If you were facing the engine with the hood up it would be just around the driver side corner of the engine. It does not come with a cover as it basically just slips right into the cartridge hole.
view full answer...
Where Does Engine Block Heater Install in 2013 Lexus RX 350 with 3.5L V6 Engine
I checked with Kat's and the Kat's Heaters Custom Fit Engine Block Heater # KH11813 that fits your 2013 Lexus RX 350 will install in the left front position, as indicated in the cut out of the manual I attached. Kat's does recommend coating the cartridge with NSCG silicone grease G-624 before inserting it into the block. I have added links to a couple video reviews of this heater for you to check out as well.
view full answer...
Recommended Cartridge Style Engine Block Heater for 2013 Toyota Corolla with 1.8L Engine
We do not have a cartridge style engine block heater for your 2013 Toyota Corolla with 1.8L Engine but we do offer magnetic oil heaters that attach to your oil pan such as the Kat's Heaters 90-watt dipstick type heater # KH15200.
view full answer...
How To Install the Kat's Engine Heater on a 2016 Toyota Sienna 3.5L V6
The 3.5L V6 engine installed in your 2013 Toyota Sienna was used in several different modules. For example, the 2016 Toyota Tacoma has the same 3.5L engine as your 2016 Toyota Sienna. The Kat's Heaters Custom Fit Engine Block Heater part # KH11813 is installed on the engine block therefore the location in which the block heater is installed will be the same across all 3.5L engines from that generation. We do not have a specific install video of this heater installed on your vehicle but...
view full answer...
Installation of Kat's Custom Fit Engine Block Heater KH11813 on 2009 Toyota Tacoma 4.0L
The Kat's Heaters # KH11813 is an aftermarket engine block heater that is confirmed to fit your 2009 Toyota Tacoma TRD Off-Road with the 4.0L engine (we do not carry Toyota OEM replacements parts). That being said, it's also compatible with different make and models of Toyota vehicles. We ran into a similar issue when installing this same heater on a 2012 Toyota 4-Runner. Around the 0:40 mark in the attached video, our installer Shane talks about a flange on the transmission housing...
view full answer...
Where Does Engine Block Heater in a 2016 Toyota Tundra with V8 Engine
I checked with Kat's and they state that the slot location for installing the Kat's Block heater part # KH11813 on your 2016 Toyota Tundra with a 5.7 liter is in the left rear area of the block. It will be in a similar spot as what you see in the install video I attached.
view full answer...
Installing Kat's Heaters Engine Block Heater # KH11813 on 2018 Toyota RAV4
We haven't gotten a chance to make an install video of the Kat's Heaters Engine Block Heater # KH11813 on your 2018 Toyota RAV4 but I did check with Kat's to verify where exactly the cartridge will install in the engine block. The cartridge will be inserted in the rear left (RL) portion of the engine. If you are facing the engine with the hood up this will be around the driver side corner of the engine. I have attached an image to assist.
view full answer...
Engine Block Heater Recommendation for a 2012 Toyota Camry
The Kat's engine block heater # KH11813 installs in a cartridge hole on the engine block. Once you locate the cartridge hole, clean the hole of all debris. You can use compressed air. You don't need to open the coolant system because the heater installs in the cartridge hole of engine block. Attach the cord to the Kat's heater # KH11813 and install the heater in the cartridge hole of your engine block and rotate the clip on the cord to secure the heater and cord to the engine block...
view full answer...
Recommended Engine Block Heater for 2018 Toyota RAV4 with 2.5L I4 Engine
For your 2018 Toyota RAV4 with the 2.5L I4 engine the Kat's Heaters Custom Fit Engine Block Heater # KH11813 will work perfectly. This cartridge heater will clip right into the cavity of your engine block and submerges in the coolant to keep them from thickening in the cold. According to Kat's the block heater will be installed on the rear left (RL) portion of the engine. I have attached a diagram below that you can use for reference.
view full answer...
How to Install the Kat's Engine Block Heater 2008 Toyota Tacoma 4.0L V6
The Kat's Heaters Custom Fit Engine Block Heater part # KH11813 for your 2008 Toyota Tacoma is going to install on the left hand side of the engine (drivers) closest to the firewall. The location for the plug will be near the drivers exhaust manifold. I have attached an installation video of this heater installed on a 2016 Toyota Tacoma for you as well. Although the year of your Tacoma's is different, they both have the same 4.0 V6 engine. Therefore, the location of the plug will be...
view full answer...
Installation of Kat's Heaters Cartridge Heater for 2008 Scion tC
The Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts # KH11813 is a confirmed fit for your 2008 Scion tC. To install: 1) Locate cartridge hole on the engine block. 2) Clean cartridge hole of all debris. Use compressed air. 3) Attach cord to heater. 4) Install heater into the hole. Rotate the clip on the cord to the proper position to secure the heater and cord to the engine block and heater. 5) Route the cord through the grill, using cable ties...
view full answer...
Installing Kats Heater KH11813 On 2016 Toyota RAV4 Hybrid
On your 2016 Toyota RAV4 Hybrid, the installation location of the Kats Heater # KH11813 is the rear left side. I've attached a diagram to help. To install your will first locate cartridge hole on the engine block, and then clean cartridge hole of all debris using compressed air. Next, you will attach the cord to heater and install heater into the hole. Make sure to rotate the clip on the cord to the proper position to secure the heater and cord to the engine block and heater. Then...
view full answer...
Recommended Engine Block Heater for a 2017 Toyota RAV4 Limited with the 2.5L I4 Engine
The correct engine block heater for your 2017 Toyota RAV4 Limited with the 2.5L I4 engine is the Kat's Heaters Custom Fit Engine Block Heater part # KH11813. According to Kat's, the block heater will need to be installed on rear left potion of the engine shown as "RL" in the attached diagram.
view full answer...
Recommended Block Heater for a 2011 Toyota Camry with 2.5L I4 Engine
For the 2.5L I4 engine in your 2011 Toyota Camry you will want to use the Kat's Heaters Custom Fit Engine Block Heater part # KH11813 which is a plug and play cartridge style heater that will not require you to drain the coolant or remove any frost plugs. According to Kat's, the hole that will need to be used for installation of this heater is located on rear left potion of the engine shown as "RL" in the attached diagram. Don't forget the Kat's Heaters Plug Cover for Power Cords with...
view full answer...
Recommended Engine Block Heater for a 2014 Toyota Camry Hybrid 2.5L I4 Engine
Yes, the Kat's Heaters Custom Fit Engine Block Heater part # KH11813 is a confirmed fit for your 2014 Toyota Camry Hybrid with the 2.5L I4 engine. This block heater is a cartridge style heater that does not require you to remove your frost plug or drain the coolant for installation. The block heater will need to be installed on the rearmost, left hand side of the engine. This location is shown as "RL" in the attched diagram. Don't forget the Kat's Heaters Plug Cover for Power Cords...
view full answer...
Recommended Engine Oil Heater for 2015 Toyota Venza
Toyota discontinued the Venza in 2015 so your car would have to be a 2015, not a 2016. Kat's does not show a confirmed fit for a block style engine heater for the 3.5L, but you can use their dipstick style heater # KH15200 which is the easiest possible option for any vehicle with an oil dipstick tube of 1/4-inch diameter or larger. This works in any such engine that allows for at least 5-inches of the heating element to be immersed in the oil. The best part of using this type of heater...
view full answer...
Troubleshooting Block Heater that Is Difficult to Install in 2015 Toyota Tacoma
As long as you have found the correct hole in your 2015 Toyota Tacoma the Kat's heater part # KH11813 would be correct for it and should slide right in. Since the hole is somewhat difficult to access you are most likely not angling it in correctly. Make sure you are trying to install it in the correct hole (see pic) and that it is lined up perfectly square as you insert it. We have heard that the catalytic converter bracket on the 2015 model can be somewhat in the way too.
view full answer...
Engine Block Heater for 2012 Toyota Tacoma With 2.7L I4 Engine
I checked with Kat's about the correct engine block heater for your 2012 Toyota Tacoma with a 2.7L I4 engine, I confirmed that the correct fit is the Kat's Heaters Custom Engine Block Heater # KH11481. According to Kat's, this will install in the right front (RF) of your engine, as you can see by the accompanying cut out I added. The other heater that you mentioned, the Cartridge Style # KH11813, is only a fit for a '12 Tacoma with a 4.0L V6 engine, so it won't work with your truck.
view full answer...
Where is the Cartridge Location for Installing a Katt's Block Heater in a 2012 Toyota Camry
The cartridge location for installing the Katt's Heater part # KH11813 in your 2012 Toyota Camry is rear left if you have the 2.5 liter or the front left if you have the 3.5 liter. I attached a picture that shows where this will be located on your engine.
view full answer...
Installing Kats Heater KH11813 on 2016 Toyota Camry 2.5L
To install the Kat's Heaters Custom Fit Engine Block Heater # KH11813 you will simply need to locate the cartridge hole on the engine block. After you find the cartridge hole you will want to clean it out with an air compressor. I spoke with my contact at Kat's Heaters and it will be located at the Rear Left location on your engine block. If you are sitting inside your Camry the it will be the rear (towards you) left corner from that orientation. Once that is done you will want to...
view full answer...